Integrate your Smappee device with Wattics Energy Management Software
Wattics has recently partnered with Smappee, a multinational clean-tech company to help energy service companies (ESCOs), energy analysts, managers to analyse real-time electricity, solar power, gas and water data. Through the new integration, Smappee device holders will be able to send their meter/sensor data to Wattics energy management platform to perform deeper analysis into energy, water use, waste, opportunities for savings and efficiencies in industrial and commercial buildings and businesses. This quick guide explains how to add Smappee meter/sensor channels (data) to your Wattics dashboard.
Start by navigating to the Smappee Integration page available from Admin > Integrations. Click on the pencil icon next to the Smappee logo in the list of available integrations to begin.
Then, follow these steps below:
1. Add your Smappee API Credentials
Enter your Smappee API credentials in order to allow Wattics to access your Smappee channels. You will need the following information: client, client secret, username and password. Enter this information in the form shown below and then click on Test Credentials.
If the credentials are valid, the Save button will be enabled. Click on Save to continue.
2. Add Channels
In order to add new channels to your Wattics + Smappee integration, click on Add new channel mapping.
Wattics will query the Smappee API to obtain the list of channels which are accessible using the credentials provided. Once this list is retrieved, the available Service Locations, Sensor IDs and Channel Numbers will populate the drop-down lists on the left side. Proceed to locate the channel of interest from these drop-down lists. Then select a name, data frequency (granularity) and position in your Wattics dashboard tree menu for the new data point. You can use the drop-down boxes on the right side to do so. Click on Save.
The newly created datapoint has now been added to the list of mapped channels.
Wattics will now automatically populate this datapoint by querying the Smappee API.
In order to add more data points to your Wattics dashboard, simply follow the instructions in Step 2 above as many times as required.
Wattics accepts water, gas, electricity (active energy, voltage, L-L voltage and current), solar and EV data from Smappee devices. Please note that electrical parameters available will depend on your Smappee device and the data that can be retrieved from the device. If you would like to send to multiple parameter electricity data (ie. active energy, voltage and current) to the Wattics platform, but not sure if these values are available with your Smappee device, please contact us using the form below.
Have a Smappee account but new to Wattics? No problem! Fill out the form below to know more about connecting your Smappee devices to Wattics energy management software and analyse your data to start identifying areas of waste in your facilities, as well as opportunities for savings and increased efficiency.